RØDE Rode mikrofon NTG-2
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
TootjaRØDE
TootekoodNTG2
Hind234,61 €
Hind (km-ta)192,30 €
Tarneaeg2-4 tp
Kogus 3
tk
TransportTASUTA ÜLE EESTI!
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
LHV järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
- Broadcast sound quality
- Low noise circuitry
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- P48 phantom power or AA battery option
- Low handling noise
- Low weight - 161g
- Includes mic clip, wind sheild and zip case
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161g without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Acoustic principle: line gradient
- Active electronics: JFET impedance convertor with balanced transformer output
- Capsule: 0.50"
- Polar pattern: supercardioid
- Address type: End
- Frequency range: 20-20000Hz
- Output impedance: 250Ω
- Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
- Maximum output level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load
- Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent noise level (A-weighted): 18dB-A
- Power options: AA Battery / 48V Phantom power
- Weight: 161 g
- Dimensions: 280 × 22 × 22 mm
- Output: XLR Output
Tüüp:
Digital camcorder microphone
Mikrofoni tundlikkus:
-36 dB
Mikrofoni suunatüüp:
Supercardioid
Sidetehnoloogia:
Wired
Seadme liides:
XLR-3
Product colour:
must
Signaali-müra suhe (SNR):
76 dB
Dünaamiline diapasoon:
113 dB
Toiteallikas:
Aku
Aku tüüp:
AA
Aku pinge:
1.5 V
Laius:
22 mm
Sügavus:
22 mm
Kõrgus:
280 mm
Mikrofoni kaal:
161 g
Toodete arv komplektis:
1 pc(s)
Sagedusala:
20 - 20000 Hz
Vajalik toitevool:
48V
© Icecat.biz