Fibaro | Walli Dimmer | Z-Wave EU | White
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
TootjaFIBARO
TootekoodFGWDEU111 ZW5 EU
Garantii
2 aastat
Hind50,50 €
Hind (km-ta)41,39 €
Tarneaeg1-3 tp
Kogus 5+
tk
TransportTASUTA ÜLE EESTI!
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
LHV järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Gross depth (mm):
115.00, 115.00
Gross height (mm):
140.00, 140.00
Kogukaal:
0.178
Gross width (mm):
77, 77
Netokaal:
0.103
Embeeded battery:
No, No
WEEE tax:
No, No
Toote värv:
valge
Remotely operated:
Jah
Tüüp:
Actors
Erifunktsioonid:
The FIBARO Walli Dimmer is a small flush-mounted module combined with a visually appealing switch, which can be used to dim the existing lighting. So you always adjust your lighting to the respective occasion. The small FIBARO Walli dimmer measures the active power as well as the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Dimmer can be used for the following luminaries: conventional incandescent lamps and halogen ELV halogen lamps and dimmable LED bulbs (with electronic transformers) MLV halogen lamps (with ferromagnetic transformers) dimmable LED bulbs dimmable compact fluorescent CFL tube lamps The FIBARO Walli Dimmer can also be used in combination with the well-known FIBARO Bypass 2 (FIB_FGB-002) to dim and switch LED lamps and energy-saving lamps without flickering
Muud funktsioonid:
Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation. Power Output 50-350W – resistive loads (incandescent and halogen); 50-300VA – resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED); 50-300VA – resistive-inductive loads (ferromagnetic transformers); 5-50W – with Bypass 2: fluorescent tube lamp or LED
Producer product name:
Walli Dimmer
Sidetehnoloogia:
Wireless
Toetatud võrguprotokollid:
Z-Wave EU
Palette Qty:
697, 697
Producer:
Fibaro, Fibaro