Arctic Cooling ARCTIC BioniX F140 PWM PS Gaming Fan, 4-pin, 140mm, Grey
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
TootjaArctic Cooling
TootekoodACFAN00161A
Hind24,30 €
Hind (km-ta)19,92 €
Tarneaeg5-7 tp
Kogus 5
tk
TransportTASUTA ÜLE EESTI!
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
LHV järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Gaming Fan with PWM PST BioniX F140, 4-pin, 140mm, red.
Features: Enhanced bearing. Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler. Optimized fan design. We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case. Maximum Quietness, Minimum Vibration. Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTIC's new motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field. 200-1800 rpm regulated via PWM PST. With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. Extended Life Span. 10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Consequently, we give a manufacturer warranty of 6 years. Two way installation. Push warm air out of the case. Pull cool air into your case.
Specifications: Speed: 200-1800 rpm. Air flow: 104 CFM (176 m³/h). Static pressure: 2.35 (mm/H2O). Noise level: 0.6 Sone. Bearing: fluid dynamic bearing. Voltage / current: 12V DC / 0.20A. Starting voltage: 4.8A. Connector: 4-Pin Connector + 4-Pin Socket. Cable length: 400 mm. Color: gray/black. Dimensions: 140x140x28 mm. Weight: 184 g.
Warranty: 6 years.
Features: Enhanced bearing. Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler. Optimized fan design. We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case. Maximum Quietness, Minimum Vibration. Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTIC's new motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field. 200-1800 rpm regulated via PWM PST. With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. Extended Life Span. 10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Consequently, we give a manufacturer warranty of 6 years. Two way installation. Push warm air out of the case. Pull cool air into your case.
Specifications: Speed: 200-1800 rpm. Air flow: 104 CFM (176 m³/h). Static pressure: 2.35 (mm/H2O). Noise level: 0.6 Sone. Bearing: fluid dynamic bearing. Voltage / current: 12V DC / 0.20A. Starting voltage: 4.8A. Connector: 4-Pin Connector + 4-Pin Socket. Cable length: 400 mm. Color: gray/black. Dimensions: 140x140x28 mm. Weight: 184 g.
Warranty: 6 years.
Suitable location:
Computer case
Tüüp:
Ventilaator
Ventilaatori läbimõõt:
14 cm
Toetatud protsessoripesad:
Not supported
Ühilduv protsessoriseeria:
Not supported
Pöörlemiskiirus (min):
200 RPM
Pöörlemiskiirus (max):
1800 RPM
Müratase:
0.6 sone
Max õhuvool:
104 cfm
Õhuvool:
176 m³/h
Pulse-width modulation (PWM) support:
Jah
Bearing type:
Fluid Dynamic Bearing (FDB)
Product colour:
Black, Grey
Ventilaatorite arv:
1 fan(s)
Number of fan blades:
9
Fan connector:
4-pin
Pinge:
12 V
Nimivool:
0.25 A
Laius:
140 mm
Sügavus:
140 mm
Kõrgus:
28 mm
Kaal:
184 g
Kaabli pikkus:
0.4 m
Package width:
151 mm
Package depth:
35 mm
Package height:
150 mm
Pakendi kaal:
229 g
Pakendi tüüp:
Karp
Screws included:
Jah
Number of screws:
4
Päritoluriigid:
China
© Icecat.biz